YCB Series Arc Gear Pumps

Product Overview YCB series arc gear pump gear of an internationally advanced level in the eighties a new technology - dual arc sine curve tooth. It is compared with involute gear, the most prominent advantage is the process of meshing tooth profile surface without sliding, so no tooth wear, running balance, phenomenon of trapped liquid, low noise, long life and high efficiency. The pump is designed to get rid of the shackles of the traditional, the gear pump in the design, production and use into a new area. Product Features YCB series arc gear pump has a pressure relief valve for overload protection, safety valve total reflux pressure pump rated discharge pressure of 1.5 times. Also allow the discharge pressure range to be adjusted according to actual needs. But this can not be the safety valve valve long-term work, when necessary, be installed in the pipeline. YCB series arc gear shaft end seal design in two forms, one is mechanical seal, one is packing seal, the user can choose according to requirements. Product Use YCB series arc gear pump for conveying solid particles and fibers, non-corrosive, temperature not higher than 80 ℃, viscosity of 5-1500cst similar nature lubricating oil or other liquids.