REXROTH Gerotor Pump PGZ Series 1X PGZ4 PGZ5 PGZ4-10/050RA07VE4 PGZ5-1X/140RA07VE4

Size PGZ420 PGZ432 PGZ440 PGZ450 PGZ563 PGZ580 PGZ563 PGZ580 PGZ5100 PGZ5140 The gerotor pump has been manufactured according to the generally accepted rules of current technology. There is, however, still a danger of personal injury or damage to equipment if this chapter and the safety instructions in this documentation are not complied with. ▶ Read this documentation completely and thoroughly before working with the gerotor pump. ▶ Keep this documentation in a location where it is accessible to all users at all times. ▶ Always include the required documentation when you pass the gerotor pump on to third parties. Gerotor pumps are hydraulic components. The product is exclusively intended for being integrated in a machine/system or for being assembled with other components to form a machine/system. The gerotor pump may only be commissioned after it has been installed in the machine/system for which it is intended and the safety of the entire system has been established in accordance with the Machine Directive. During project planning, the basic principles of the EU Machine Directive or comparable local regulations outside of the EU are to be observed. The product is intended for the following use: Gerotor pumps are intended for the assembly of hydraulic drive systems, particularly in machine-, system- and aggregate construction.