BOSCH Rexroth A2FE Fixed Plug-In Motor

Series 6 Size Nominal pressure/Maximum pressure 28 to 180 400/450 bar 250 to 355 350/400 bar Open and closed circuits Features – Fixed plug-in motor with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in open and closed circuits – Far-reaching integration in mechanical gearbox due to recessed mounting flange locat in the center of the case (extremely space-saving construction) – The output speed is dependent on the flow of the pump and the displacement of the motor – The output torque increases with the pressure differential between the high-pressure and the low-pressure side. – Small dimensions – High total efficiency – Complete unit, ready-assembl and test – Easy to install, simply plug into the mechanical gearbox – No configuration specifications observe when installing Hydraulic fluid Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90222 (HFD hydraulic fluids) and RE 90223 (HFA, HFB, HFC hydraulic fluids) for detail information regarding the choice of hydraulic fluid and application conditions. The plug-in motor A2FE is not suitable for operation with HFA hydraulic fluid. If HFB, HFC or HFD or environmentally acceptable hydraulic fluids are used, the limitations regarding technical data or other seals must be observed .