What are the connection methods of our common Vickers vane pumps in life? This question is probably not very well understood by most users, right? Today, I will talk to you in detail about the connection of Vickers vane pump, and the matters that need to be paid attention to are as follows:
Duplex Vickers vane pump
1. It is composed of two single-stage double-acting Vickers vane pumps in parallel.
2. Two sets of rotors and stators are installed in a pump body, driven by one shaft. The oil suction port is used, with its own independent pressure port, according to the needs of the flow, can also be used separately.
3. When working quickly, the double pump jointly supplies oil;
4. When working slowly, the high-pressure low-flow pump supplies oil separately.
5. This can reduce power consumption and reduce heat.
Two-stage Vickers vane pump
1. It is made of two single-stage Vickers vane pumps connected in series.
2. The oil outlet of the first stage pump is connected with the oil inlet of the second stage pump, so that the pressure of the oil in the first stage pump rises, and the pressure can be further increased by entering the second stage pump.
